Where do you set crank and cam shaft marks to set timing on a 1996 Nissan Pathfinder?"
Did the timing belt snap ? if so the engine will have bent valves and require more work than just the belt. This is timing belt job is not one for the inexperienced diy mechanic. Not trying to be a wise guy, but get the manual, the timing mark set up isn't a simple explanation .
how do i adjust my distributor for timing
gime the diagram the timing chain marks of motor 3.5 odsmobile intrigue yr. 2000
at top dead center, camshaft mark at 12 o'clock and crank at 5 o'clock. belt should also have marks if it a Nissan belt.
where is the timing marks on the Nissan cd20 engine
Nissan timing marks g15 engin
i need nissan sentra 1.6 timing marks diagram
every pulley has a mark on it that matches a notch on the inner timing belt/ oil pump cover, line up the white lines on the belt with these marks and that's it.. all 3 marks will line up belt-pulley-case.
the timing marks are on the cam and crank gears in the timing case.
A 95 pathfinder ignition timing is controlled by computer, but 0 is tdc so -5 is the first mark to the left.
there are paint marks on the chain. once you line it up it should be on tdc
Timming is off. I replaced the water pump on my 95 pathfinder and the fact that the timing belt has to be removed, there is a good chance that one of the cams turned. When the timing marks are lined up, it does not take much for one of the cams to get off its mark. Even a slight bump will do it, and it doesn't help that Nissan does not make the timing marks that visible to see. I used white paint and a small detail brush to mark the timing marks.
cam timing marks are on the timing gears inside the timing case cover the crank timing gears are located on the harmonic balance (big pulley wheel at bottom of engine on front of crank)