0
Connect the line to a source that is above the throttle body on the carb. It should be a source that has no vacuum at idle.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Where does a turbo 350 vac line hook on intake?
There should be a vacuum port on the back of the intake, behind the carburetor. It has to have vacuum on it at all times.
Where should the vacuum advance be connected to on a 350 Chevy with a 2 barrel carb?
Look on the carb for a small vacuum source above the throttle body. You would want one that has no vacuum at idle.
How do you bleed hydraulic anti lock brakes on a ford 350?
hand operated vacuum pump . hook up and and apply vacuum and open bleeder and keep applying vacuum then close bleeder. repeat x4
Where can you find a vacuum line diagram for the two barrel carburetor on a 350 engine?
checker auto parts
How do you vacuum time a balance Chevy 350 engine with out a homonic balancer?
All engines must have a harmonic balancer instaled on them. Balanced or not. Hook a vacuum gauge to direct vacuum port on intake. That is a place that will have vacuum on it when the engine is running at an idle. Then read gauge and move the distributor until you get the highest vacuum reading. It should be 18 to 21 inches of vacuum at an idle.
Where can i get a vacuum diagram for 1973 Chevy c10 pickup 350 engine 4 barrel quad vacuum diagram?
Try Your Local Automotive Store or Buy A Book On That Vehicle And The Diagram Should Be In The Book < $14.00 -- $20.00 But Make Sure Be You Purchase It.
How to Check vacuumm on a 350 Chevy?
You need a vacuum gage, hook it to a vacuum port that has constant vacuum. It should have about 19 to 25 inches of vacuum at idle for a stock engine if the timing is set correctly. Now quickly snap the throttle wide open the gage should drop to about 5 then back to where it was. You can also set the timing by adjusting the distributor so you get highest vacuum reading.
Where should the vacuum advance be connected to on a Chevy 350 with a holley 650 carb?
It has to be hooked to a vacuum port that only has vacuum on it when you give it gas, That is called ported vacuum. If you look at the holly, you will see some small vacuum ports on it, start engine and witch ever one don't suck on your finger then that will be the 1 you hook it to. Then plug the rest if you don't need them for something else.
What is the vacuum on 96vortex 350?
18 to 21 inches of vacuum is a normal reading on a vacuum gauge.
What is the horsepower of a 1980 chvrolet 350?
Advertised horsepower is 350 light duty is 170hp @ 4000 rpms. 4-barrel carb. 350 heavy duty is 165hp @ 3800 rpms. 4- barrel carb. 350 light duty Calif. is 170hp @ 4000 rpms. 4- barrel carb.
What is the horsepower of a 1976 Chevy 350?
145 if it has a 2 barrel, 165 with the 4 barrel.
Need a cacuum emissions diagram hose routing for a 1978 Chevy nova 350 4 barrel?
There should be a sticker located in the engine compartment that shows the emission related vacuum line routing.
