It goes to the top wire on the coil, the one that usually has a cover over it.
need to know where to hook coil wire is all i need to know.
off the neg. coil wire just t in
Connect the green wire to the negative side of the coil.
There should be a blue wire behind your original gauges. That's where you hook up your green signal wire
The green wire from the tach goes to the negative side of the coil.
You will need to hook up your tachometer to the coil connector. After disconnecting the throttle sensor and applying the hand brake, look for the plain black wire at the coil connector to hook it up to.
a tachometer, wire and wire terminals
A bad ignition coil can cause your 1987 Acura tachometer to quit working. A bad tachometer cable or ground wire can also cause it to quit working.
The window winder is secured by a spring wire clip. Push the circular pad away from the winder handle and pull out the clip with a crochette hook or similar.
White wire coming from the distributor.... remove a section of sleeve from wire and splice the signal wire from tachometer to it!
i dont know whwere is the tachometer wire of 2001 ford windstar
DISCLAIMER: I am not responsible for your actions You need an ECU diagram of your vehicle. Find the correct pin # and find the wire that attaches to it. Use a wire tap and run that wire as the signal wire to your new tach