0
What else can I help you with?
Is 10 kva supply to 3 phase load is equal to 10kva supply to single phase load?
Yes of course!! 10 kva electrical power is 10 kva electrical power either it would be three phase or single phase. But other factors i.e. current, voltage changes accordingly. Actually this question is quit confusable. Because in 3phase system, if each phase gives 10kva power (single phase power = 10 kva) then 3 phase power will be 10 X 3 = 30 Kva If we go leteratualy towasrds the question, then the asnwer will be - No. becasue 10 kva supply to 3 phase load will be 3phase supply(i.e440V) & 10kva supply to single phase load will be single supply (i.e 250V).
Why each phase no load power factor of 3 phase induction motor is not same?
That indicates a fault in the induction motor.
What happened when one phase missing of a 3 phase load?
When one phase is missing in a 3-phase load, the load will experience an imbalance which can lead to overheating and potential damage to the equipment. The motor may run slower or produce less power, and the efficiency of the system will decrease. It is important to address the missing phase quickly to prevent further damage.
Load test on 3 phase induction motor?
When you do a load test on a 3-phase induction motor you are checking the power factor, viz slip, and efficiency of the motor. You can test various loads with this test.
How you convert the value of single phase power to value of 3 phase power?
Electric power is measured in watts. It does not matter if it is single phase or three phase. All things being equal, for the same load, the power measured in a single phase circuit or a three phase circuit, will be the same.
What are the difference between 220 v 3 phase motor and 415 volt 3 phase motor Like Torque starting load anything power savings in 220 volt?
The difference in voltage is a minor detail and the power used depends largely on the mechanical load power on the motor.
Wave forms of 3 phase fully controlled rectifier for RL load?
for 3 phase r l load phase control rectifier what is the avg value?
Why a 3 phase 15 hp motor used to pump water is not taking any load?
Most likely a defective phase winding in the motor or even a missing phase in your power input.
What is the full load current of 200kW 380V 3-phase generator with 0.8 lagging power factor?
304 Amperes
Why is the amperage in single phase double than of 3 phase?
If I have 1 KW In 3 Phase it will give 1.54 A and In single phase it will give 4.6 AFor cosF 0.9V 415 3 phV 240 1 phIt seems the reason is because the current is carried on more wires. Also, remember that if wattage stays constant, then as voltage increases, current decreases.AnswerIt really depends on the load. Are you assumining the three-phase load to be the same as the single-phase load or, as it is likely to be in practice, three times the value of the single-phase load?But, in either case, the single-phase current will not be double the the three-phase (line) current!The equation for the load current supplying a single-phase is: I = P / (E x power factor)The equation for the line current supplying a balanced three-phase system is: IL = P / (1.732 x E x power factor)If you insert real figures into these equations, (240 V for the single-phase voltage and 415 V for the three-phase line voltage) then you will find that, when the three-phase load is threetimes that of the single-phase load, the supply currents will be exactly the same. On the other hand, if you assume that the three-phase load is exactly the same as the single-phase load, then you will find that the three-phase line current will be one-third that of the single-phase current.
What are the key features and benefits of a 3 phase power generator?
A 3-phase power generator provides more stable and efficient power distribution compared to single-phase generators. Its key features include higher power output capacity, balanced load distribution, and better performance for industrial and commercial applications. The benefits of a 3-phase power generator include improved power quality, increased reliability, and the ability to support heavy-duty equipment and machinery.
What is the full load amps of a 3 phase 415v 14.7kw motor?
0.073 assuming 0.85 power factor
