There should be a black metal tube behind the engine with a pull ring. It's easily visible. Just need a funnel to fit in the tube and pour e tranny fluid in.
700R4
Approximately 5 quarts. Then more in the transfer case itself if emptied.
Look near the rear of the transmission on the driver's side.
Through the dipstick tube.
yes it will up to 93 as long as they are bothe 4wd or to wheel drive
Are the door interchangeable on an 1987 chevy truck and an chevy blazer 1988
Yes, I had a 1987 S10 Blazer 4+4 with the 2.8L engine and a standard transmission.
the linkage to the transmmison probably needs to be adjusted
there is no fluid for a manual transmission
The 1987 Chevy S 10 blazer five-speed standard transmission will bolt to the automatic transfer case. The transmission mounts will need to be swapped and the shifting linkage will be different.
Pull the transmission dipstick and read what it says on the stick, it will tell you what fluid it requires.
I have a 1987 Chevy Blazer S 10 4X4 2.8l V6 and the timing recommendation is 10 degrees.