answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Where does the two hoses for the oil cooler go?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you hook up an oil cooler on a Chevy 350?

they make a kit that goes were ur oil filter is located goes between block and filter. has High pressure hoses that connect 2 an adapter. hoses go 2 the front were the cooler will b located . its woth the costs lower oil temp longer engine life>


Do you have a diagram of where transmission hose goes on a 1992 buick park ave?

When you say "hoses". I would think you are talking about the cooler hoses from the transmittion to the radiator. They go to the radiator. there is an transmittion oil cooler built in to the radiator. the cooler is just a coil of metal pipe in the coolant(anti-freeze). It doesn't matter witch way the hoses go (in or out), it will still work fine. If it the vaccum hose that you are talkintg about, it goes to the intake manifold.


How can you tell if you have an Engine Oil Cooler on a '93 S10 Blazer?

Look and see if you find one. I just replaced the o-rings and gaskets on my 93 S10 Blazer 4WD, there is a block where the oil filter would normally go and hoses leading up to the remote oil filter location under the air filter housing, the oil filter housing has a cover on the opposite side of the hoses marked oil cooler where an oil cooler hose set would lead to an oil cooler if it had one. I suspect your blazer is like mine and doesn't have an oil cooler. The kit I had to get with the gaskets and o-rings was called an oil cooler repair kit. I have the 4.3 v6 with the cci vortec injection. I was wrong in telling you that my 93 S10 Blazer didn't have an oil cooler, I looked at it again today to help answer another question and found oil cooler lines leading from the remote oil filter housing. They go down which is why I didn't see them when I worked on the lines from the engine. there should be two oil lines running from above the oil filter to the rad, just like an a/t cooling line


How can you tell if your 1996 Mazda 626 has a transmission oil cooler theres 2 plastic fans in front of the radiatorand what appears to be a smaller radiator on the grill sidemaybe a tran cooler?

the smaller "radiator in the front of the other one" is actually part of your cars air conditioning system. if you are standing in front of your vehicle and are looking into the engine bay, on the passenger side of the radiator will be two metal fittings/tubbing that lead to rubber hoses near the bottom of the "two fans" then these hoses go into the transmission. if anywhere these hoses instead go into a ( say 6 inch by 9 inch "radiator looking contraption" that would be the cooler) if not. then the transmission lines are stock.


Where do your oil cooler lines go on your 6.2L diesel?

Okay 2 types of oil cooling system fitted to these trucks. Light duty , and heavy duty. light duty, Oil cooler lines go from the oil filter housing to the radiator. oil cooler is built into the radiator. Heavy duty, Oil cooler lines go from the oil filter housing under the radiator and in front of the radiator there is a mini oil cooler.


1992 delta 88 royal 3.8v6 you need to buy a radiator how do you tell if your radiator has a engine oil cooler on it so you can get the right radiator?

radiators are used as transmission coolers (typically) and only on automatic transmissions. you will have two metal oil cooler lines that go from the trans to one of the side tanks of the radiator. if you indeed have an engine oil cooler (on newer cars and trucks) you will have an add'tl two lines that go from the engine block (usually at a oil filter adapter housing) to the other radiator tank. if you have a standard trans and still have cooler lines going to the radiator its for engine oil. some but not many vehicles use the engine oil cooler as a total separate cooler usually mounted in various locations around the radiator and it will be smaller.


How do you know if your heater core is plugged up?

1 of the 2 hoses that go to the core are much cooler then the other,indicaring a clog


How do you remove the engine oil cooler adapter from a 91 350 and reinstall filter without adapter?

I assume you are working on a 350 Chevrolet small block with the factory GM oil to water cooler in the radiator? Why remove the oil cooler? With the engine cold, remove the oil filter from the adapter. Remove the lines from the remote cooler adaptor first. Then look up into the cavity (above where the oil filter screws on) and you will see two bolts. Remove these two bolts and the adaptor will come off. Obtain a regular GM (Chevrolet small block) oil filter adaptor from any non-oil cooler application with the bolts. There are a million places to get these. Bolt the new adaptor in place, screw on a new oil filter and off you go. The factory filter seals against the flat surface of the engine block and the filter now screws onto the oil filter adaptor instead of the cooler adaptor. You may want to remove the oil lines to the radiator and plug the oil cooler openings in the radiator. If the oil cooler is already or begins to leak you will loose coolant through the cooler openings. mlynch003@yahoo.com


How do you bypass the heater core on a 98 Ford Expedition?

Remove the two hoses that go through the firewall to the heater. Connect these two hoses together.


Where do the two small coolant hoses that come from the fat tube behind the water pump go on a 1995 Geo Tracker 16 valve?

The Two Small Hoses That Comes Off your Water pump Go To Your Heater Core The Hoses Are About 3/4"


How many quarts of oil go in a GMC Engine 455 Motorhome?

Your engine will take 6 quarts of oil ,,,unless it has the optional external oil cooler,,then you will have to know the capacity of the cooler. Be careful when putting oil in--it's always easier to remove excess oil than remove a damaged engine due to lack of oil.


Where are the transmission cooler lines for a neon?

The transmission cooler lines are located coming from the radiator on the bottom. One is for the sending and the other for return. The lines are high pressure, just as your radiator hoses are when the car is running. The lines go from the radiator to the top of the transmission.