after the vehicle is warm & at normal operating temperature the idle speed should be 700 rpm +/- 50rpm
If you are referring to the blower motor only working on the high speed setting, then the problem is the blower motor Resistor Pack is defective. Replace it. It can be the blower motor speed control switch but not likely.
speed control switch inside trans
Does not have one. Idle speed is controlled electronically through an idle speed control module.
If you have checked the blower motor and it does function when power is applied then I would suspect the Blower Motor Resistor Pack is defective. It is also possible the blower motor speed control is bad, but highly unlikely.
yes
Not factory.Not factory.
The idle speed is computer controlled and is not adjustable. If the speed is incorrect, there is a malfunction with the idle speed motor, a sensor, or wiring.
i heard the speed sensor is connected to the rear right wheel.
Road Runner Railway was created in 1999.
there is a resistor that controls the speed and should be near the blower motor its called blower motor resistor
The blower motor relay for high speed would be located in the power distribution box under the hood.
The Runner - 1999 is rated/received certificates of: Argentina:16 Germany:16 Portugal:M/16 USA:R