Want this question answered?
The pcv valve should be located on top of the valve cover. It plugs in, and should pull out with some gentle coaxing.
for a 86-1/2 to 92 supra, the expansion valve is located in the evaporator case. mike b.
Located at the evaporator inlet which is under the dash in the heater/AC housing.
where is the expansion valve located
High side (pressure) & low side (pressure) are separated by an expansion valve (located in the evaporator unit for Celica). High pressure side are of smaller pipes (warm/hot when A/C running)-->compressor -->condensor --> receiver drier -->expansion valve. Low pressure side has bigger pipes cool/cold when A/C running) -->expansion valve -->compressor. It should route under the airflow meter, going around the consensor & back to the compressor. Hope this helps, cheers, Kev.
The expansion valve is located in and with the evaporator, inside the evaporator case. This case is a somewhat square, plastic enclosure located directly behind the glove box on this vehicle.
Located at inlet to AC evaporator which is located under the dash in about the center of the firewall. The entire dash has to come out to get to it.
It Means Variable Valve Timing Technology - Intelligence
Duct Tape
Do you mean the expansion valve for the A/C? That is near the evaporator under the dashboard.
Attached to Evaporator.You have to remove the evaporator from inside the car to get to it. A pain.
The expansion valve is located on the passenger side of the vehicle behind the dashboard. To gain access to it you will have to remove the glove box and the dash.