Want this question answered?
There is no dipstick for the gearbox the punto has a filler/level plug on the front of the gearbox 12mm Allen key fitting hope this helps best wishes Mike 2
There is a filler level plug, You'll need a 12mm allen key for that. It is located on the front face of the gearbox casing, next to the reverse light switch.
On a Fiat Punto, the sump plug is at the base of the sump. It should be a hexagonal fitment and somewhere between 12-13 mm. .
The firing order for fiat punto 1200 is 1,3,4,2.craig duggan where is number 1 plug
The firing order for Fiat punto 1200 is 1,3,4,2.craig duggan where is number 1 plug
Filler/level plug is located at the front side of the gearbox
The spark plugs on a Fiat Punto are changed by removing the spark plug wire cover and pulling firmly on the plug wires. A deep wall socket can then be used to remove and replace each spark plug.
spark plug FR7DC2 set gap 0.9mm
remove the black plastic breather (17mm) and refill with 2lt of gear oil after draining the old oil from the gearbox using the drain plug on the bottom of the box (21mm)
it has not got one you have to remove gear box sump plate
Its a hexagonal fitment and should be 12-13mm
From the right side of the bike, get down and look underneath the area where the gearbox is located, you will see a drain plug in the middle of the gearbox casing (obviously for the gearbox) and nearer to the outside of the bike there is a same size drain plug in a small down tube which is open at the bottom and is connected to the oil tank.