Want this question answered?
In the museum.
The EGR valve on a 2000 Ford Windstar is located on the intake manifold near the firewall. It is typically located to the left of the main throttle body or slightly lower than the throttle body. On the passenger side it is located on the side of the intake manifold closest to the firewall. On the driver side it is located on the side of the intake manifold closest to the engine.
You might want to check your main vacuum line
Knocking is usually associated with worn main and rod bearings.
The main fuel filter is on the frame rail almost directly under the driver's seat.
yes - visit a Ford dealer
Possibly under the hood of the van in the main fuse box. big blue or black square fuse.
in best buy!
The Ford Neutral Safety Switch is an electronic part with the main function to stop the vehicle from getting started while in gear. The truck will not start when the switch is faulty.
inside the airbox
If you are having heater/air conditioning issues in your Ford Windstar, the first thing to check should be the blend door. Broken blend doors are the main cause of heating issues in this vehicle. The Blend Door actuator on the Ford Windstar can be found by removing the glovebox. A broken blend door actuator is almost as common as a broken blend door itself. Typically, the fix requires disassembling the entire dash and replacing the whole plenum box, which can be a costly repair. Linked here is a video from www.heatertreater.net demonstrating how to access components of the plenum box for repair without disassembling the entire dash
The Hard Drive is located in the main shell of the computer. in a desktop pc, it is usually below the disk drives, but on a lap top it is located where you put your palms when you type.