on the front passenger side of the vehicle it is the pump that has the third belt n it
No.
Motorcraft MERCON ATF
The belt is tightened with an adjusting screw.
There is no power steering in a Mercury Villager at start up in cold weather due to a failing pump or low fluid. Fluid becomes much thicker in cold weather and is much harder to pump.
There are several sections of power steering hose on this vehicle, both supply and return. They run from the reservoir down to the supply lines to the steering rack.
It is to the right of the steering wheel, behind the paneling below where your knee would rest. You do not have to remove anything, you can just reach behind the paneling.
You probably have an air lock in the pump. You need to take the pump apart and assenble the veins with vasoline so it will prime itself. GoodluckJoe
It is located to the right and just below the power steering reservoir.
It is on the back of the power steering pump. The power steering pump is located on the left hand side of the engine. It will be a cap with the dipstick molded on to it. Remove the cap and you will be able to see the fluid.
Into the power steering reservoir.
* No power steering fluid in reservoir * The power steering pump is not operating
You have to ask a more complete question.