Want this question answered?
Hi,There are actually a few different fuses that power the BCM (Body Control Module). But I am assuming that you are looking for the fuse that is used to program the BCM.If you refer to the link I have provided, that fuse is number 47, and it is located in the Instrument Panel fuse block. This fuse block is accessible when you open the passenger side front door.Take Care, Greg
in the fuse panel located in the engine comparment
Hi,There are actually a few different fuses that power the BCM (Body Control Module). But I am assuming that you are looking for the fuse that is used to program the BCM.If you refer to the link I have provided, that fuse is number 47, and it is located in the Instrument Panel fuse block. This fuse block is accessible when you open the passenger side front door.Take Care, Greg
The bcm is located behind the fuse panel under the driver side below the steering wheel there is a plastic panel and when you remove that there is the fuse box and behind the fuse box is the bcm
at the inside fuse box at the back side
Hi, The fuse that you are looking for actually labeled "BCM Programming" in the diagram I have. If you refer to the link I have provided, that fuse is number 47, and it is located in the Instrument Panel fuse block. This fuse block is accessible when you open the passenger side front door and remove the plastic access panel. Good Luck, Greg
There isn't a relay, but there are interior light fuse located in the passenger side of the dashboard. The panel can be accessed with the door open. If the bulb and fuse are ok, the wiring to/ or the BCM(body control module) is damaged. The BCM is located under the driver's side dashboard.
The interior fuse box is part of the BCM. For more tiburon knowledge go to www.newtiburon.com "forums" More info than you can imagine!
located in the fuse box end of dash on passenger side if you open door pull cover off sometimes hard to pull
The factory alarm is part of the body computer programming. The BCM is located under the dash on the left side, back side of the fuse box.The factory alarm is part of the body computer programming. The BCM is located under the dash on the left side, back side of the fuse box.
inside the center console - right side - the panel is held in with a velcro tab in the front. You will find the second of three fuse panels within - that is also the BCM.
It does not have a BCM.