0
1. Open the hood. 2. Find the intake/exhaust manifold. On the top front of the motor. 3. Look on the right side of the manifold. It is the round thing, about 1-3/4" diameter and about 2" front to rear. Housing is metal, semi bright. 4. It is attached with two safety bolts (5 point if I remember correctly) internal. Easy to get to and easy to remove.
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
97 Jeep Grand Cherokee egr valve location?
The 2002 Grand Vitara EGR valve is located on top of the engine. The EGR valve will be between the engine and the battery.
Where is the egr valve on a 97 Jeep Grand Cherokee 4.0?
Doesn't have one.
Where is the egr valve on a 5.7 1997 camaro?
97 Z28 camero 5.7 egr vavle located on engine
Where is the EGR valve located on a 97 Chevy Astro Is it accessed from under the hood or under the engine cover?
The 1997 Chevrolet Astro EGR valve is located on the top of the engine valve cover. The EGR valve can be access from under the hood. You will not need to remove any engine cover.
Where is egr valve on 97 Jeep?
A 1997 Jeep does not have EGR
Where is the egr valve located on a 1997 Dodge Dakota 5.2?
there in no egr valve on a 1997 dodge Dakota 5.2 318 Auto Zone is wrong
Where is the EGR valve located on a 1996 Acura TL 3.2?
not sure about the 96 but they are similar to the 97. On the 97 you remove the plastic cover, the EGR valve is located on the left side (standing in front of and facing the car) to the rear of the engine about the 11 oclock position.Answerit should be under warranty - there was a recall or something
Where is the egr valve on a 97 dodge Dakota 5.2?
A 1997 5.2L doesn't have EGR.
Were is the egr valve on a 97 dodge ram van 2500 6cy?
A 1997 Ram does not have EGR
Where is the EGR Valve in a 97 Honda CR-V?
Pretty sure the 97 Honda CRV doesn't have an EGR valve. I have a service manual for the 97 and it's nowhere to be found. I think some Civics didn't have one either.
Where is the egr valve on 97 neon SOHC 2.0?
On the Head itself.
How do i remove and clean the EGR Valve on a 97 geo prism 1.6L?
After unbolting the EGR valve, clean it with a carburetor spray. Allow it to dry completely before reinstalling the valve.
