There was no EGR Valve befor 1994 on Ford Explorers.
On the 1995 and later models 5.0l V8 models are equipped with pressure feedback exhaust gas recirculation (PFE) system. It is in the front of the engine to the left of the oil feel tube.
guess again.
left hand follow tube up from exhaust manifold.
For the engine oil , it is on the passenger side valve cover
On a 1994 Ford Explorer : The modulator valve for the A4LD automatic transmission is on the passenger side of the transmission ( I believe it is behind a heat shield )
On a 1994 Ford Explorer : The modulator valve is on the outside of the A4LD automatic transmission , on the passenger side of the transmission , I believe it is behind a heat shield
The heater control valve on a 1994 Ford Explorer is located near the firewall on the passenger side of the engine compartment. My 1994 Ford Explorer has a four port valve. This means that there are four hoses connected to the valve. It is very easy to view, as it sits directly on top of the engine compartment, near the a/c drier. It is easy to access. Should take less than ten minutes to remove and replace it with an OEM part. A very fast and easy fix!
The PVC valve on a 1994 impala is located on the valve cover. It is close to the dip stick end.
It is located in the right valve cover.
The PCV valve on a 1994 Regal Custom should be located on top of the valve cover. It is a plug in type and is easily changed.
I know on my ( 1995 ) Ford Explorer with the 4.0 liter when I look in the engine compartment from the drivers side , the EGR valve is just to the left of the engine oil dipstick just above the exhaust manifold ( the top is round shaped )
The PVC valve is located in the breather separator under the intake manifold.
The 1994 VW Jetta PCV valve is located on the outside of the air cleaner housing. You can find the valve on the back side of the housing.
Hi- your pcv valve is located right in the center of the valve cover (usually black cover that says Honda on it)
On top of the valve cover!