2002 5.3 Chevy don't have egr valves factory removed them in 2002
The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.
In your a hole
The heater blower for a 2002 Chevy Silverado is mounted under the dash. It is on the passenger side, in the heater housing.
There are several and they are all located on the exhaust system.
Pass side firewall.
It is in the fuel tank, NO JOKE
There is no EGR valve on the 2002 4.3L (code W)
The PCV valve on a 2002 Chevy Suburban 6.0 liter engine is located in the engine. You cannot miss the valve.
Located behind the starter. Have to take starter off to get to it.
Inside the fuel tank.
there isnt one after 2002 for 5.3 and 4.8 models for sure
The PCV valve is located on the top of the valve cover. There will be a large vacuum line connected to it.
The knock sensor is located on top of the block in a 4.8 2002 engine. The intake will have to be removed to get to the sensor.
if it is a 4.3l vortec it is on drivers side valve cover
The thermostat is locating in the waterpump, where the lower rad. hose connects.
picture of location of the fuel filter on a 2002 Chevy silverado 1500 LS.
i have a 2002 Chevy silverado and i think it holds about 40 gallons.
Its a hand crank protruding from the front. When winding be careful not to dislocate your thumbs
What's the curb weight of 2002 Chevy Silverado 1500 LT , Z-71
need to find out how to replace a power brake booster in a 2002 Chevy silverado 2500 HD
There are multiple O2 sensors on a 2002 Chevy truck. They are all located on the exhaust system. There will be pre catalytic converter and post catalytic converter sensors.
The cam sensor is located on the left side of the engine (as your looking at it) on the valve cover
The coolant temp sensor on a 2002 Silverado with the 6.0 engine is located on the drivers side cylinder head close to the front of the cylinder head.
http://wiki.answers.com/Q/Where_are_the_grease_fittings_located_on_a_2002_Chevy_Silverado_2500 has already answered this question