Want this question answered?
The evap purge solenoid is located on the top of the engine. The evap vent solenoid is located in the rear drivers side wheel well, attached to the charcoal canister.
its behind the coils against the firewall
The evap canister is located under the vehicle close to the fuel tank. The canister is charcoal filled and holds fumes from the tank.
in the back on the drivers side
An EVAP system is the system in the car that retrieves fuel vapors from the gas tank, as well as the rest of the fuel system. The EVAP system will then recycle these vapors so they can be burned in the engine. The EVAP port is a test port where a vacuum can be attached to check for leaks in the EVAP system.
It is located under the truck near the tank.
Evap pump
YOU WILL FIND IT MOUNTED ON A BRACKET UNDER THE TRUCK BY THE FUEL TANK
behind the rear passenger tire
if it is the 5.7 it should be on the left side of the upper intake. about 3 inches tall and about 2 in diameter. it will have an electrical connector and plastic tube connected to it.
where is the evap purge valve located in a 1996 jimmy
Trouble code P1457 means: EVAP Emission Control System Leak Detected (Control Canister System) Need to check the EVAP canister for leaks in the hoses