it should be right beside the thermostat its a 2 wire sensor usually with a blue insert on it
In answer to your question the coolant temperature sensor on a 2000 Pontiac grand am with a 3.4L engine, is located on the rear of the engine above the flywheel. It is located just behind the what I believe is the alternator.
where do i find the low side service port on a aztek
Check the engine coolant... Is it full? yes coolant level is full
The coolant bleeder valve should be on the front passenger side of the engine. It will be on one of the metal hoses. The bleeder valve on the 3400 V6 engine is located on a black stem where the water pump connects to the engine block.
G2 Engine Coolant Temperature (ECT) SensorG2 Engine Coolant Temperature (ECT) SensorG32 Engine Coolant Level (ECL) SensorG32 Engine Coolant Level (ECL) SensorG32 Engine Coolant Level (ECL) Sensor
check/replace the engine coolant level sensor located in the engine coolant overflow reservior (located at the rear of the engine compartment pass. side)
Fill your coolant reservoir and the light should turn off. Do it soon or your engine may over heat.
In the radiator in the front of the engine
The engine coolant temperature sensor and coolant temperature gauge sender are located on the passenger's side of the engine, under the intake manifold.
Look at the rear of the radiator approx. 1/3 down from the top
The engine coolant drain plug on a Mitsubishi V6 engine is located on the bottom of the radiator. This allows for coolant to be quickly and easily drained.
the engine coolant temperature senson is located just below the throttle body on the front of the engine