0
It's either in the intake or in a hose between the intake and valve cover.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where is the PCV valve on a 2000 GMC Sonoma with a 2.2 liter engine?
PCV valve on top of the valve cover towards the end of the cover. Will have a 90 degree black rubber boot on it.
Why doesn't my 1996 Geo Metro doesn't go pass 90?
do you mean hiway 90? might be a service station that the metro wants to visit... If you mean 90 kph, then you have a fuel problem. If you mean 90 mph, it is because it's not legal in the US and the Metro knows this
Where is the PCV valve located on a 1999 Oldsmobile Alero?
on the 3.4L V6 it is located on the front valve cover, just to the right of the oil filler cap. there is a hose with a 90 degree boot on it. remove that and pull out the PCV valve.
Geo tracker 90 clicking noise in the TFI when start and during warmup and it disappears and show again when engine runs 2000 rpm or at normal with beams on Injector replaced and problem not corrected?
It may be the pcv (positive cranckcase valve) or the idle air control valve, iav.
Where is PCV valve on vw passat 1.8t?
2000- 2004 1.8t have the pcv valve on the top rear of engine. It's two connections are 90 degrees to each other. Black part with a disk shaped top.
Where is the PCV Valve located at on a 1999 Oldsmobile Alero?
Look on the front valve cover and it is to the right of the oil fill cap. There will be a black hose going to it that makes a 90 degree angle. Pull that off and then pull the PCV out.
Where is the PCV valve located on a 2002 ford explorer 4.6L v8?
It is located on the top of the left valve cover. there will be a hose with a 90 degree bend going into the valve cover.
Where is the PCV valve located on a Plymouth Voyager 3.0?
what year??old one like 90 and back in v cover 90 and newer in intake
Where is PCV valve on Mazda mx6 2.5.?
it is the plastic 90 degree elbow coming out of the front valve cover. can't miss it. it has a vacuum tube connected to it.
Where is PCV valve on Mazda mx6 2.5?
it is the plastic 90 degree elbow coming out of the front valve cover. can't miss it. it has a vacuum tube connected to it.
What is the torque setting for a wheel lug nut on a 1993 Geo Metro?
Rule of thumb is 90 foot pounds on passenger cars
1995 dodge avenger PCV valve location?
On the v6 its on the front valve to the far left side. You will see a rubber hose which goes into a 90 degree bend into the valve cover, slide that out.. Voila
