Yes, there are 350 turbo transmissions that will bolt up to a 4x4.
call auto parts and check part numbers on both years to see if they match.
8 and 12
what is the Factory front ride height for a 1994 nissan pickup
.15mm or .006 inches cold.
Yes, switch the transfer case to neutral.
4 and 6 cylinders wont change out.
Yes it will, Thay are the same.
under the dash in the fuse panle to the left of the steering collum
EGR valve, purge valve, And maybe a air pump.
I Use 1/2 inch of toe in
having a similar problem. have traced it back to a cold start valve and an egr valve. both are clogged on mine.
My 2500K has a 5.7l (350) big block.
Almost all had 1.94 intakes and 1.50 exhausts.
Yes....That is called HEI. If I remember correctly they were used starting in 1974.
4x4 fuse location on a 97 dodge pickup
The idle valve is located under the intake manifold. It has to be removed from the bottom of the vehicle. Have a 2.6 Isuzu pickup and i had to replcace it.......hope this helps
If it's a 1/2 ton, it will be a 4L60E The 3/4 ton will be a 4L80E.
The Nissan 4x4 pickup 2.3 was produced from the years 1990 to present in the United States. The spark plug gap on a 1986 Nissan 4x4 pickup 2.3 is .044.
The most common engine used was the 5.7L 350 V-8. But it may have the 6 cylinder in it. Count the spark plugs.
It will fit, obviously the body styles will clash abit, but no biggy
The Auto Trader website is a good way one could find a used 4x4 pickup online. They have dozens such vehicles listed for sale. One can also find a used 4x4 pickup for sale online at 'netcars'.