On the valve cover
PCV stands for Positive Crankcase Ventilation, is a valve that releases air by turbulance created inside the engine when the crankshaft and piston are turning while engine is running.
It may be a stuck pcv valve.
It's basically a "plug-and-play" installation. Simply pull the hoses off the ends of the current PCV and replace it with the new PCV. Replacement is reverse of removal.
On the v6 its on the front valve to the far left side. You will see a rubber hose which goes into a 90 degree bend into the valve cover, slide that out.. Voila
Where is the pcv valve on 2007 dodge dakota 4.7 mag. Eng.and the egr valve also?
On a 1996 Chevy Camaro, the PCV valve is located on the right side of the valve cover. There is a hose that runs from the PCV valve and connects to the back of the intake manifold.
The PCV valve is located in the valve cover, on the 4.7L it is in the side of the oil filler housing.
The PCV valve on a 1991 Dodge Dynasty 3.0 engine is on the passenger side of the vehicle. It is on the crankcase.
On a 1996 Ford Ranger , 4.0 : The PCV valve is on top of the drivers side engine valve cover , near the rear of the valve cover
most all pcv valves are located on the valve cover
passenger side valve cover
Screws into the valve cover.
Center of the rear valve cover.
The valve is in the center of the rear valve cover.
Attached to the valve cover is a hose on the driver side. Unscrew the nut closest to the valve cover and that is the PCV valve. It is a straight PCV valve, not the elbow shape you may be looking for.
go to the local auto shop and tell them you ned your pcv valve replaced
The PCV valve is located on the side of the oil filler.
The PCV value on a 2003 Dodge Durango is on the side of the oil fill shaft.
In the valve cover right I think.
driver side valve cover
sohc or dohc?
The PCV valve on a 1996 Ford Escort 1.9L is located between the engine and the radiator. It is near the vacuum hose.
On my '02 Dakota the PCV valve is on the driver's side valve cover. .
On the 2.8 it's on top of the plenum at the back. disconnect the hose & unscrew the pcv valve & replace.