This item is located next to the frame approximately underneath the driver's feet. You will see rubber hoses coming down into this unit.
It is a relay and an example of one circuit that it controls is the secondary air injection pump circuit.
Question I need to replace the smog pump on my 2004 gmc envoy with the inline six, what is the best procedure Optional Information: Year: 2004 Make : GMC Model: envoy Engine: in line 6 1. Jack up the truck. 2. Disconnect both the air inlet and air outlet pipes from the secondary air injection (AIR) reaction pump. 3. Remove the electrical relay from the AIR pump bracket. 4. Disconnect the electrical connector from the AIR pump. 5. Remove the 3 bolts securing the AIR pump bracket to the vehicle frame. 6. Remove the AIR pump from the vehicle.
the secondary air injection system is the smog pump and valve. the valve is located on the exhaust manifold with 2 hoses leading to the smog pump which is located under the drivers side floor. it is electric.
It is located under the vehicle along the frame under the driver seat. The relay is also located there.
Secondary air injection malfunction. Maybe the air pump failure or a leak?
The secondary air pump is located on the passenger side of the engine near the top sticking out of the side.
don't know
What tools are needed to replace secondary air pump on 2001 Oldsmobile intrique
get fan clutch checked may be blowing air but not enough
Secondary air injection system fault PO410 The air injection system is monitored for faults. Probable causes: 1. Circuit relay defective or fuse open 2. Check conncetor and wiring 3. Air pump defective or hoses blocked
Yes.
The secondary air system pump is on the driver side below the battery .