Want this question answered?
There is an article here with photos for changing an air mass meter.
the mass air flow sensor detects the flowing of mass air into the engine while the mass air flow meter detects the amount of mass air flowing into the ingine.
by the air filter
no its not. idlecontrol valve controls idle mass meter measures air flow into itake
Where is the mass ait flow meter on a 20v turbo.
In the intake,after the air filter plastic
That depends on the mass, pressure, and temperature of the air in the cubic meter.
An air flow meter, also know as air consumption meter, is a device that measures how much air is flowing through a tube. It does not measure the volume of the air passing through the tube, it measures the amount of mass flowing through the device in a defined time segment. So, an air flow meter is just an application of mass flow meters for a special medium.
10.0 to 10.1
1300
1 Remove the upper casing of your mass air flow meter by prying the lock tab up and off the plastic housing or removing the bolts that hold the housing in place. Consult your vehicle's manual for the exact location of your meter and the type of housing it has to know if you will need to use a socket set to remove the housing.2 Lift the mass air flow meter up and out of its compartment. Be very careful not to touch the wiring that is on the meter, a slight touch can ruin the connection and you will have to replace the entire meter.3 Attach the red straw that came with your CRC Mass Air Flow Cleaner Spray to the spray nozzle by simply pushing it into the nozzle opening.4 Hold the can so the end of the spray straw is a minimum of 5 inches away from the mass air flow meter and spray the cleaner onto the meter. Rotate the meter in your hand as you spray and make sure you coat every portion of the mass air flow meter.5 Set the meter on a clean surface and let it air dry for 15 minutes. Re-install the clean mass air flow meter into your car............ nick ..uk...
Air definitely has lower mass than bricks.