Located inside the transmission Check auto zone.com repair section
Assuming you have an automatic transmission the dipstick is located under the hood on the passenger side in back of the engine, close to the firewall.
That would be the 4L60E
The shift linkage on your Chevrolet Blazer automatic transmission will go from the shifting handle to the right hand side of the transmission. The shifting linkage is actually a shifting cable.
The 1996 Chevrolet blazer transmission control system helps the transmission to maximize optimal fuel consumption. The control system keeps the transmission in the overdrive gear.
That would be a 4L60E automatic.
There are 4 different options for the type of transmission that came in a 1988 K5 Blazer. They are the 4 speed SM465 manual, the 3 speed TH350 automatic, the 3 speed TH400 automatic and the 4 speed 700R4 automatic.
No. You can remove the engine and leave the transmission in the vehicle.
There are many bolts that assemble a transmission, automatic or standard. Be more specific.
1993 was the first year the automatics used the electronic 4L60E transmission. Any 1993 - up Blazer/Bravada/Jimmy/S10/S15 automatic transmission should do.
No, different bolt pattern.
700 R4 if it is automatic. 2x2
The transmission dipstick on a 1998 Blazer should be located at the rear of the engine. It should not be near the oil dipstick.
use the dipstick tube
Any year 4L60E (automatic) or NV3500 (manual) transmissions will. If you have a 2WD Blazer, then it needs to be a transmission out of a 2WD vehicle, and if it's a 4WD, then you need a 4WD transmission.
The 2002 Chevrolet blazer speed sensor is located on the side of the transmission. The speed sensor will be on the right hand side of the transmission.