What makes you think it has one? Not all 88 Berettas had a block heater. If it does have one you should see a power cord somewhere.
the wiring sequence for a 88 chev beretta
how to remove timing cover with heater pipe attached 92 olds 88 3.8l
I have a 1992 Olds with the 3800 engine; the block heater is almost inaccessible. The engine is sideways and the block heater is in the frost plug location just over the frame at the back. Suggestion: unless it is leaking just take the frost plug out in the front of the engine and install the block heater there where it is accessible. Duane
The Toyota Camry block heater is located on the front of the engine block. You can follow the block heater cord to the block heater.
A block heater is not standard equipment.A block heater is not standard equipment.
you may have to remove the intake from the block and then use an extractor tool to remove the rest. then replace the connector.
Remove and engine block expansion plug. Insert the block heater. Seal the block heater. Attached the wiring harness to the block heater.
The 2002 PT Cruiser block heater is located on the front of the engine block. You should be able to follow the block heater cord to the block heater.
The Pontiac G6 block heater is located on the right hand side of the engine. The block heater can be located by following the block heater cord.
Begin by training the water from your 2003 engine block. Remove the wiring harness from the block heater. Remove the block heater retaining bolts. The block heater will come out. Reverse the process to install your new block heater.
It does not have a block heater.
You can find the 1993 Oldsmobile Cutlass block heater on the right hand side of the engine block. You can follow the block heater cord directly to the block heater.