On the break pedal assembly, it's kind of hard to get there but it's a little black button. When it's pushed in, the lights turn off and when it's depressed, the lights turn on.
The brake lights are located in the trunk of a 1997 Acura Integra. To replace them open the trunk and find the plastic housing. Remove and replace the bulbs.
Look directly up from brake pedal, under the dash. You'll see when you mash the brake down, it contacts a little button, which is the brake switch. The switch is a plug, you pull it out to replace, you push it in. simple.
On a 1989 Acura Integra hatch back the brake lights are reached through the hatch itself. The brake lights housing are on the rear of the vehicle. Unplug the bulbs and replace them.
on a acura integra type r if you brake the head bolts what do you do on a acura integra type r if you brake the head bolts what do you do
yupp they fall off all the time
well i had the same problem on my da check your brake switch its located on the bottom of the brake pedal
There is a sensor in the top of the brake cylinder where you put in the fluid. Replace it and the light will go away.
you buy brake pads and you change them
The 1991 Acura Integra brake lamp number is 2057. See sources and related links below for a picture and more information.
The brake light fuse on a 1995 Acura Integra is located inside the cabin of the vehicle. It is on the same circuit as the dash and hazard lights.
No, the brake booster on a 1994 Acura Integra is different from a 1992 model. The 1994 model is a different generation and uses a different sized brake booster.
Replace bulbs Check the fuse Check the stop light switch