UNDER the dash, on the steering column and it makes contact with the brake pedal It looks like a bracket, that wraps around the brake pedal arm, and it has a cylinder type switch that makes contact with the brake pedal arm. When the brake pedal is pressed down it pushes the cylinder switch together which closes the circuit and makes you brake lights come on. It may be a fuse or wires but start with the switch.
The Chevrolet Colorado brake light switch is quite simple to change. The brake light switch simply plugs in and out.
what does it mean if my brake light is blinking on and off when its pushed down in my 1999 Chevy silverado
the brake light switch is on the top of the brake pedal arm. under dash.
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
top of brake pedal
The 1999 Chevrolet Malibu brake light switch can be found beneath the dashboard, next to the brake pedal. The brake light switch simply plugs in and out.
Depending on the year and if your brake light bulbs double as turn signals, there may be a problem in the turn signal switch if there is no short in the rest of the wiring.
Take hold of the brake light switch and pull backwards. The switch will come out in the same way that you would unplug anything. Plug the new switch in
check the brake light relay under the hood
The brake light switch is under the dash, and whenever the brake pedal is touched the brake light comes on. If the switch has failed or is out of adjustment it will leave the brake light on.
It is on a bracket under the dash and above the brake pedal.
Replace brake light switch.
The light should be controlled by a switch operated by the emergency brake handle. The switch could be out of adjustment or could be bad.
the switch is located at the top back of brake pedal!!
where is brake light switch
A bad brake light switch, and it is bolted to the steering column in under the dash.
Check at the upper end of the brake pedal undeer dash area
It is mounted on a bracket under the dash at the brake pedal. From there it is self explanatory.
be more specific the break sensor?parking break light?
It is located under the drive side dash. The brake pedal mechanism presses against the switch when you press on.
Usually on the upper end of the brake pedal under dash area
I think it is next to the brake pedal at the top. When you press on brake the switch button comes out putting the elect to the light bulb. May just need another brake light switch at an auto store. look up under dash to the top of brake pedal arm you should see switch next to steering col-um .
on the brake pedal under the dash there will be a king pin pull it out and remove the stud and the switch should come right out then dosconnect the wireing harness and replace switch
* It could be a blown fuse or * the brake light switch on top of the brake pedal under the dash is bad or * the turn signal switch is bad.
You can try to reset your brake light switch by unplugging the brake light switch and plugging it back in. If that does not solve your problem you will need to replace the brake light switch.