May be at the upper end of the brake pedal under dash area
Look under the dash on the 1996 suburban, and locate the brake light switch on the brake pedal arm. Remove the switch nut, and slide the switch out. Unplug the wires from the switch and install the new switch.
The 1996 GMC Yukon brake lights work by receiving power from the brake light relay switch. The brake light relay switch is connected to the brake pedal.
where is the brake light switch for 1996 Oldsmobile cutlas supreme
check the wires at brake light switch on brake pedal they are bad about breaking brake light switch
It is underneath the Brake Pedal.It's mounted to and right above the brake pedal.
The engine computer through the brake light switch.The engine computer through the brake light switch.
The break light switch is located on the backside of the break peddle arm.
Above the brake pedal where the master cylinder is attached to the brake pedal assembly.
Check brake light switch - could be defective or not aligned properly
First check the brake light fuse, if good, then test the brake light switch.
will you please let me know exactly fuse brake light in 1996 lincoln town car.
brake switch gone bad car will not shift out of park if brake goes bad