The cam sensor is located inside the distruberator and is held in place by two 15 torx screws.
I just replaced the one in my 1997 Yukon and Auto Zone showed it on the timing cover but they were wrong It is a DR188 wells number
The Camshaft sensor is located in the distributor.
It sure can.
The camshaft position sensor is located in the engine compartment of the 2002 Daewoo Leganza. It is at the end of the camshaft housing.
The 1999 Chevy Suburban camshaft sensor is located on the front of the engine. The camshaft sensor will be behind the front engine cover.
On a 2004 Chevy Astro, the camshaft sensor is located in the front of the engine. It is on the left side of the timing cover behind the camshaft sensor.
The camshaft position sensor is located on the timing chain cover at the front of the engine.
The camshaft position sensor on your 2002 automobile is located on the front of the camshaft. You will need to remove the front engine cover to access the sensor.
Do you have the 3.4l or 2.4l engine, the camshaft position sensor for the v6(3.4l) is located under the power steering pump
The sensor is down on the front of the oil pan just behind the crankshaft pully, which is located at the front of the engine.
The Camshaft Position Sensor is located under the Rotor within the Distributor. Remove the Distributor Cap (two screws - one in front the other in back), located at the rear of the engine, then remove the Rotor (two screws). The Camshaft Position Sensor is located under the Rotor mounting housing. The engine will need to be turned (hand cranked using a wrench - large nut behind the cooling fan) to position the Rotor mounting housing in the proper location to remove the sensor.
The camshaft position sensor, on a Ford 6.0 liter power stroke engine, is located inside of the rear engine cover. The sensor is on the back of the camshaft.
Its in the distributer.