Look at the back of the engine where the slave is for the clutch. The bleeder is right there. Just follow the hyd. line on the right side.
If you're talking about the brake bleeder it's on the caliper.
Look at the back of the engine where the clutch line goes in the engine. 3 bolts to take out and it's in your hand.
Most hydraulic clutch systems do have a bleeder valve.
Brake bleeder? Clutch bleeder? Coolant bleeder?
where is the bleeder valve for 2003 Saturn ion clutch
First make sure that the master is full, follow the d.o.t. spec's for the fluid. The valve is located at the rear of the engine where the clutch goes in. Loosen the bleeder first, then tighten it up. Have someone depress the clutch, while they hold the clutch in, you open the valve, the fluid and air will come out, tighten the valve, and tell the person to release the clutch. Repeat this several times to get all the air out. Re-fill the master each time.
if youre referring to the bleeder valve, its on the clutch slave cylinder bolted to the transmission
Its on the slave cylinder which is on the front of the transmission just left of the front engine mount bracket. It looks just like a brake bleeder screw.
You will find the bleeder valve on the Slave Cylinder, which is mounted on the front of the transmission, by the radiator. You will find it in the front and center of the engine compartment.
The bleeder valve in right on the slave cylinder, no idea how to open it though, it's all plastics and no screws
on the bottom of the clutch arm going into the tranny it looks like a little nipple like a brake bleeder screw
The bleeder is located at the clutch arm on the bell housing. There is a fluid line going from the master cylinder to the clutch bleeder. This metal line has flexible hoses at either end. Follow this line down to the front of the engine just about in the middle and you'll find the bleeder valve.