Use the set button just below the volume down key
SONY
Most Auria televisions use the same codes as NEC models. Check the manual on your universal remote for the code for NEC televisions.
I want to tell you what just worked for me... 1. Turn the component on that you want to program 2. Press and hold that component key (TV, VCR/DVD, or SAT/CBL) on your remote 3.Press ON/OFF button until your unit turns off. 4. Press Stop button to program the "code" that you remote found to work your component.
Your remote's model is actually PMDVD6. You should be able to get the manual for this remote from Philips' website.
Such codes are generated by the universal remote manufacturer rather than the TV manufacturer. As such, the actual codes will differ from one remote to another. Regretfully, Olevia TV's (for the most part) use proprietary infrared frequencies. This means that the code for another TV brand will not work with Olevia TV's. If you are looking for a universal remote, Olevia made a learning remote (model RC-LRN). Amergence Technology Inc. sells them for 39.99. They can be reached at 866-965-3842.
how to program my tv with the RCA D 770 - universal remote control which has no code search button
Press "Code Search" button for 5 seconds. When the red light is on release the "Code Search" button and keep pressing the "shut down" button until your TV/DVD turns off. When it turned off press "Enter" button and complete the process.
a button on your emerson remote control
press and hold code search button then select the device u want to use then press power code search start blinking looking for the right code then push ok
I was able to use the code search on a GE 4 function remote, I found the remote for $5 at Big Lots. I started the search with the TV on and let it run until it shut the TV off. Steps I took, press and hold the setup key - then release, press and release the TV button, press and release the power button, after TV turns off then press the #1 button to lock in the code. This remote does almost everything but the sleep button.
Try the link to Sentry.
To program the remote with the codes, firstly, turn on the electronic gadget for which you are going to use this remote, by pressing the On and Off button. Then locate the Setup or the Code Search key on the remote control. These buttons may vary from remote to remote. Just hold on the setup or the code search key for 5 - 10 seconds or till the light on the remote
I do not have the code for my samsung dvd/vcr combo model vr370 to enter into my tevion big button universal remote control
SONY
First Hold the set button down a few seconds then at the same time without letting go of the set button, hold down the device button ie TV. Then release the set button, then the device button. Then press the set button once to start the search. The device you are sinking the remote with should switch off. If it does press the device button to store the code. If not then restart your search until it does.
What is universal remote control code for air-con?
The universal remote code differs for each individual television.