0
The coils are bolted to the ignition control module, there is no coil wire as such.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you change the speed sensor on 1990 Chevy Celebrity?
The speed sensor on a 1990 Chevy Celebrity is on the top of the transaxle on the passenger side of the car. To change it unlatch and remove the wire harness then remove the two bolts that hold it in. The speed sensor can then be lifted out of the transaxle. To reinstall a new sensor reverse these steps.
1990 Chevy Celebrity cigarette lighter does not work?
1. blown fuse 2. broken wire from fuse block to lighter 3. bad ground 4. bad lighter
How do you install an ignition coil on a 86 Celebrity?
To install an ignition coil on a 1986 Chevy Celebrity: 1. With the ignition off unplug the wire harness from the coil, also remove the coil to distributor wire. 2. Remove the bolts that hold the coil mounting bracket to the intake manifold. 3, The coil should now come off. 4. The new coil comes without the mounting bracket. Therefore you must cut the rivets loose that hold the old coil to the bracket. The new coil should come with screws and nuts to mount it to the old bracket. Mount the coil to the bracket. 5. Position the coil mount onto the intake manifold and bolt it down. 6. Plug the cables and distributor lead back into place.
Will the ignition coil get damage if unplug it while the motor is running. 2002 Chevy Cavalier.?
Unplugging the coil wire and not grounding it, yes that can damage the coil.
How do you replace a 1970 Chevy ignition coil?
take the wires off the + and - side of the coil, pull the coil wire out of the coil, unbolt the coil from the manifold, to install just reverse directions.
How do you replace the ignition coil on a 1990 Honda CRX?
The coil and distributor are one unit, there for, no coil wire. Yes it is a sealed unit and has to be replaced as one.
How to change coil pack on 1987 Chevy Celebrity?
The coils are held in place with two small screws. Remove the spark plug wires making note of where each wire goes, then remove the screws and pull the coil straight out. To replace the coil line up the connectors and push the coil in place, then put the screws back in and reconnect the spark plug wires.
What is the correct wire by color to hook up to a yellow memory wire for a CD player in a 1988 Chevy Celebrity?
the red one
Where do you attach the wire to add a tach to your 93 Chevy S10 Blazer 4.3 V6?
The ground wire of the coil. Its the white wire with a black stripe.
Where is the coil and coil wire on a 1999 Chevy s 10 2.2l 4-cylinder?
There is no coil wire only spark plug wires. The coil pack can be found on the lower passenger side of engine block. It is best seen and accessed from under the vehicle.
Why does your 1987 Chevy Celebrity skip?
Are you asking about an engine misfire? If so you can use an inductive timing light to determine which cylinder is not getting any spark. Misfire could be caused by: Bad spark plug. Bad spark plug wire. Bad coil. If it is the coil then two cylinders would misfire.
Where is the ignition coil on a 1998 Chevy blazer?
On top beside the intake on passenger side of vehical... You can trace coil wire from distributor to find
