Lower corner rad, driver side. Looks like a plastic key.
The coolant bleeder on the 3.5L is on the thermostat housing on top of the engine.
there isnt one after 1996
The coolant bleeder valve should be on the front passenger side of the engine. It will be on one of the metal hoses. The bleeder valve on the 3400 V6 engine is located on a black stem where the water pump connects to the engine block.
use half coolant and half water
Brake bleeder? Clutch bleeder? Coolant bleeder?
top of head right side , takes a 10 mil wrench .
Not sure but, if it does have a bleeder it would be located at the highest point where the coolant flows in the engine.
If there is one - it should be located in the top of thermostat housing
It should be a bleeder screw connected to the cooling system, it might be two.If you find it,you should open one at a time.Pour coolant into the system slowly,until coolant start coming out of the bleeder screw and then close it . DO it to the second screw too.Now if you do not have the bleeder screws.Pour coolant into your system slowly and squeeze the top hose until no bubbles come out and the coolant level should go down at this time and then pour alittle more in there
No.
coolant air bleeder
If you mean the coolant bleeder valve, it doesn't have one.