its on the top passenger side of the transmission and hangs down into the bellhousing and is held in by two bolts, its simple to replace if you have a lift but can be a tight fit if you have big hands
how to tell if my crankshaft sensor is not working
right side of engine block, midway down
The sensor is behind the front pully under the crankshaft. It's held in by one bolt and takes about 5mins to change.
The crankshaft sensor is located in the engine on a Chevy 1500 truck. This is under the hood.
Fault code 11 is for loss of crankshaft sensor signal.
crank sensor is located at the top of the transmission bell housing,two hex bolts that hold the crank sensor in place.
The 2001 Chevy Express Van crankshaft sensor will be on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
There not 1
the crankshaft position sensor is located on the passenger side of the engine blockit is a three wire connector small black circular sensor with a 13mm bolt be carefull removing they like to break.the cam sensor is in the front of the passenger side head facing down
Crankshaft sensor intermittent. Or crankshaft circuit intermittent.
Not enough info to answer. Please ask a new question and include year, make, model, and a description of the problem.
Do nothing. There was no such thing in 1967.