The 16 pin scan tool connector is on the driver side behind the panel under the steering wheel. A 2-pin connector is located behind the glovebox on the passenger side. This can be used with a single jumper wire, hook it up and count the flashes of the "check engine" light, or count the flashes of the "D" light in the transmission selector to diagnose electronically controlled transmission problems. A Honda factory service manual is available online for less than $20, a good deal as there are dozens of engine and transmission codes possible to diagnose this way.
Under the dash or behind the glovebox
The diagnostic connector in a 1994 Honda Accord Ex is located under the dash on the passenger side of the car. If it has not been accessed before it will have a green sleeve over it. If you do not see a green sleeve, look for a brown two wire plug.
1994-97 Honda Accords have the data link connector neatly clipped directly under the glove box and the connector is blue.
where is the location of the diagnostic connector to 1994 camry?
the 1994 Honda accord has an obd2 ecu.
There is no OBD2 connector on a 1994 Honda Accord. Your car is not OBD2 compliant. You car is OBD1. Click the link for detailed instructions with photos on how to retrieve the code.
where is relay on 1994 Honda accord for sun roof
no
97 honda accord headbolt specs
1994 Honda accord ex remove rear rotor
how to install and replace a rack and pinion on Honda accord 1994 lx
yes