Want this question answered?
One may be located inside the master cylinder One may be located by the emergency brake pedal --upper end almost under dash
it is behind emergency brake on top!!
Brake fluid is below the master cylinder sensor or the sensor itself is bad.
The fuse for an emergency brake is located under the brake pedal. However, it is only on the drivers side of the vehicle.
The brakelight sensor is located on the brake switch, which is on top of the brake pedal and held on with a 14mm jam nut.
The emergency brake release on a 2010 Chevy Malibu is located beside your left foot. You would push down on the emergency brake pedal to release it while having your right foot on the regular brake.
Loose contacts or your sensor may be stuffed - see an auto electrician
the sensor is in the brake pad itself, it clips in top of brake pad
the brake sensor for the 2001 dodge stratus is located on the inside of the car under the brake paddle.
it means your emergency brake, or hand brake is set. if the brake is released, check cables and sensor. could also be the switch or sensor.
There is a brake fluid sensor located in the reservoir at the master cylinder. When the brake fluid is low it will turn the light on.
Usually located at the bottom of the emergency brake handle - may have to remove trim for access