Actually, the drain is a Allen or hex-key screw located on the right side of the block towards the back of the engine. In fact, is is roughly above the oil filter and is almost flush with the block. Look beneath the carburetor with a mirror or from beneath the vehicle and you'll see it. The block needs to be drained when performing a full flush.
where is the ignition module located on a 1988 Mazda b2200
where is the EGR valve on a 1989 mazda b2200
A Mazda B2200 engine with carburetor has 85 horsepower, and with fuel-injection has 105 horsepower.
The Mazda B2200 truck body did not change much, if at all between 1986 and 1993. There should be no differences in the shape of the engine compartment. -Kyrasis6 Owner of Mazdatruckin.com
no
All mazda b series with a b2000 or b2200 are a NON interference engine.So in short if your timing belt broke it will not damage the engine.
yes you can its a straight swap you don't even have to change engine mounts
in the gas tank ?
In the fuel tank.
The 2003 Mazda engine coolant temperature sensor is located on the front of the engine, above the thermostat housing. The sensor will have to wires leading to it.
No
where is the fuel pump on a 89 Mazda b2200