It is located under the upper intake manifold. It is connected to the bank of fuel injectors (poppets) bank.
It is in the throttle body.
how do u replace fule pressure regulator in 94 blazer vortec
It is located in the throttle body.
It is in the throttle body.
The manifold absolute pressure (MAP) sensor is an important component to your 1994 General Motors Blazer/Jimmy's EFI system. This pressure sensor is located provisioned into the intake manifold assembly.
depends on the type of fuel injection on the motor... on the CSEFI injector assembly the regulator is located under the air intake plenum on the back of the fuel meter body. If it's TBI, the fuel pressure regulator is located inside the throttle body.
Vortec is the motors name in the blazer and it is a great motor
The fuel pressure regulator is located under the upper intake manifold on the passenger side of the poppet bank. If the regulator is leaking raw fuel the fuel will run down into the passenger side cylinders. So if the black plugs are on the passenger side that could be the problem.
The regulator is under the plastic upper intake manifold. It is in the end of the injector housing or pod.
That is were the fuel injectors are at, and the fuel pressure regulator is on the rear of it.
Under the upper intake assembly
it is under the upper intake manifold, if you have a vortec engine