Under the glove box. There is a drop down panel under the glove box held in place by two slotted retaining clips, twist these until panel drops then you can access fuse box.
In the fascia fuse box, it is fuse number 20.
i have a rover 75, 1.8. it has about 26,000 miles on clock. when does my timing belt need changing
Its in the plenum camber. The most idiotic place on the car.
Good Question
Re: Rover 75, 2.0v6 petrol engine. The manufacturer states the belt(s) (there are 3 of them) should be changed at either 6 years or 90,000 mile interval (whichever is sooner). Quote for job from ex Rover dealership in Northumberland is £473 complete (inclusive of parts, 7 hours abour and vat).
the rover 75 comes with the ftg unit inside the glove box. just unscrew the panel below (2 screws) and you will find the connector that plugs straight in and then feed it into the glove box (which is were your CD multi will be housed) when you get it.
There are a number of reasons for this, but varies between petrol and diesel. Diesels dont like the cold. The diesel engines in the 75 are BMW common rail engines.
Yes, it is situated above the clutch pedal inside the car. You will have to remove the panel above the pedals to access it.
How do i time rover 75 v6 engine/
Petrol engines 10w/40 ACEA A2 (spec.) Diesel engines 10w/40 ACEA A3/B3 (spec.) ...or better.
Rover 75 Under bonnet fuel pump - WQB100482 - Roughly £180 Rover 75 Under bonnet fuel pump - WQB100482 - Roughly £180
You have to remove the starter motor to view the sensor position Depends on which engine is fitted 4 cylinder 1.8 petrol is at the front of the engine at the flywheel end.