You must remove the speedo drive gear to fill the gearbox.
what oil filter does mazda 121 uses
how to change the mazda 121 gearbox
Remove shifter and add oii through the top
No
3.2 litres in a 1.3 litre
Yes it needs gear oil! Hypoid gear oil, The filler bung is at the front of the gear box as you look at it! A squaredrive bung.
what type of gear pulley to use to take off oil pump on 1996 Mazda mellinia?
Manual trans. API GL-4 SAE75W90W or 80W90W gear oil Differential API GL-5 SAE 80W90W hypoid gear oil Transfer case API GL-4 or GL-5 SAE80W or 90W gear oil
I have a 2002 model, and there is 0.70L stamped on the engine casing next to the oil filler cap.
80w 90 gear oil
Generally speaking, there is an upper filler hole with a plug and a lower drainage hole with a drainage nut on most motorcycle shaft drives. Most manufacturers recommend something like a SAE 80W gear oil for the drive shafts. You remove the drainage nut, located a bit lower than the filler hole, and the oil will drain out. In some bikes you have to suck or pump the gear oil out through a small piece of tubing through the filler hole. Refill with oil through the filler hole, normally on the shaft's side, until the oil reaches the lower edge of the hole. The reinstall the plug.
Where the driveshaft enters the gear box. There are two plugs, the top one is the filler/level plug.