The hazard flasher on a 2000 Mercury Cougar is located under the dash on the driver's side of the vehicle. It is in the slot next to the turn signal flasher above the brake pedal.
It is located inside the steering column. Half way down the column there should be two screws.Remove the cover and the flasher should be right there. 12 Volt 2 Terminal #LF 12
the fix is to replace turn signal flasher the hazard flasher is separate from the turn signal flasher
Turn signal flasher?
The turn and hazard flasher relays are incorporated into hazard switch.
the flasher is located under the dash down near the ash tray
It is located underneath the hazard switch, as it is incorporated with the hazard switch.
On the left side of the steering column there is a light black tab that you pull down.
check beyond the top of the steering wheel. between the steering wheel and the indicators, you should see the button to turn on the hazard lights..
Integrated with the hazard flasher switch (which is in the dash)
It has 2 flasher relays. One for the turn signals and one for the hazard lights. The turn signal flasher is located on the drivers side, under the dash, driver side of steering column, mounted in the fuse panel.
It is bolted just above the emergency brake pedal behind the far left side of the dash. It might be easiest to remove the panel under the steering wheel. Turn on the hazard flashers to help you pinpoint the module. ~Mike Steinbach