Want this question answered?
The module is part of the switch
The 2004 Ford Ranger pickup truck signal hazard flasher unit can be found beneath the drivers side dashboard. The signal hazard flasher unit will be above the brake pedal.
Both the hazard flasher unit and the turn signal flasher unit are in the main fuse box and are identified
Have solved the problem. Hazard and turn flasher are one and the same unit.
Inside the hazard switch.
it is not the hazard system, but comes from the speedo cable which is routed behind the dashboard thus making it sound like the flasher unit.
Often, a separate flasher unit is used to activate the hazard flashers. This unit might be bad, or the switch to activate the hazard flashers might be bad. answer always there are 2 flashers.one for turn signals other for hazard replace hazard flasher They have separate fuses also.
On my 2002 Passat the hazards and the turn signals all operate through the same flasher unit that operats the hazards. This is behind the hazard switch. See related questions for removal details.
Have you checked for the flasher unit for hazards not sure where to find it on a cherokee.
Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
The flasher unit is contained inside the hazard light swith on the dash. You need to remove the dash panel and pull the switch out from behind. The entire switch must be replaced which is about - at a Chevy dealer.
Possibility you may have a bad hazard flasher unit or turn signal switch. The cheapest route is to try to replace the hazard flasher unit as your first solution to the problem. Hazard flasher units should only cost you under $10 .