it's built into the computer.
Look on the timing cover.
The thermostat for a 1999 Chevy Camaro V6 engine can be found under the hood. It is in the right side of the engine, under the throttle sensor.
No it does not
how do you change a crankshaft position sensor on a 1999 chevy camaro z28?
On a 2004 Chevy Impala, the traction control sensor is located in the ABS pump module. On the driver side of the car, the sensor is located at the left center of the engine compartment with black wires hanging from it.
Behind the motor and down about 2 inches.
Vehicle computer is located on passenger side engine compartment on firewall.
The MAF is located on the air intake manifold in between the block and the air filter (housing).
It should be in the intake manifold directly underneath the throttle body.
Coolant sending unit is located at the front of the left cylinder head
No, there is a sensor and a sender. The sensor is located on the front of the engine, under the plenum, to the driver side of the thermostat. The sender is located directly behind the power steering pump reservoir.
the knock sensors 1 and or front and back are locaded under the intake
It is located on the passenger/right rear side of the engine, near the oil filter.
The 1994 Chevy Camaro horn is located in the front of the engine compartment. The horn will be on the right hand side of the radiator.
most small blick chevys have the oil sensor on the back of the motor behind the intake just right of the distributor
WHAT YEAR ?????
where is the temperture sensor located on a 2002 chevy trailblazer with a 4200 motor
the oil level sensor is located on the oil pan. it is screwed into the pan next to the oil filter.
The 99-2002 camaro 3.8 V6 doesn't have Idle air control valve. It is drive by wire control. Many of the parts dealers have the wrong data that 95-02 3.8 camaro have the same Idle air control valve location, and sell the wrong part.
on throttle body next to Idle control valve.
where is the crank sensor located on a 2005 chevy impala