If you have disributorless ignition it will be mounted under the coil pack . If you vehicle still has a distributor it will be in the dist.
The ignition control module is located directly beneath the coil packs. These can be found at the rear of the engine, on the top center. Just look for where all the spark plug wires connect, those are the coil packs, and they are bolted to the ignition control module. It has three electrical connectors, two on the driver's side and one on the passenger's side.
Where is the ignition control module located in my 1992 Crown Victoria
ignition control module is located under the distributor cap
Where is the control module located on the 1983 Chevy blazer
The Ignition Control Module on the 4 cyl models is located under the Distributor cap.
Where is the ignition control module on a 1987 nissan 300zx
it is located on the side of the air cleaners housing the one that say ignition control module in all chryslers car
The ignition module is located in the distributor, under the distributor cap.
1994 was the last year the Ranger used an ignition control module on the 2.3 and 2.5. The ignition control module was attached to the lower intake manifold.
should be on right side, front of engine. at upper radiater hose, if not there check the thermostat housing!! on the 3.1 it is located by the ignition control module.
The Ignition control module is located under the coil which is on top of the driver side wheel well, Commonly known as an ignitor.
the ignition control modual is located on the backside of the fuse box under the dashboard.