The 1989 Ford Ranger pickup truck ignition module is located on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
where is the ignition module located on a 1988 Mazda b2200
ignition control module is located under the distributor cap
The ignition module on a 1989 5.7 liter is located in the distributor. Remove the cap, then the rotor, and you will be looking at the module. The module is held in place with two screws. Real simple. Good luck, David
it is located on the side of the air cleaners housing the one that say ignition control module in all chryslers car
5.5 mm but takes a special tool to remove module the tool is 4.99 at auto zone just tell them what ur replacing and they will get you the o.e.m ignition module tool
under the distributor cap
The engine computer is the ignition module. It is the large black box under the hood.The engine computer is the ignition module. It is the large black box under the hood.
Will be located on the firewall. Flat, square box mounted with two screws.
Because you didn't change the rest of the ignition system. Plugs, Wires, Rotor, and Cap are a must for ICM replacement.
In the 1989 Volvo 740 GL with a Bosch system it is located just above the steering column on the dash.
Behind the coil pack in the front lower center part of the engine.
the module is located under the ignition coil. The coil and module is on the passenger side shock tower. The module has three female connectors along the edge face the block.