You should be able to find a shop manual at your local library -- make copies of the right sections as they are usually only available in the REFERENCE section...good luck :)
The ignition module is located in the distributor under the rotor, it plugs in.
The ignition module is located in the distributor under the rotor, it plugs in.
It is inside of the distributor.
The 1992 Chevrolet Corsica ignition module can be found on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
The module is located underneath the coil packs.
The 2000 Chevrolet Corvette blower motor control module can be found behind the passenger side dashboard. You will need to remove the dashboard in order to access the module.
where is the ignition module located on a 1988 Mazda b2200
If you remove the distributor cap, you will see it bolted on the base plate
where is the ignition module located ina 2000 integra acura
Begin by removing the wiring harness from your 1998 Chevrolet Suburban ignition module. Remove the ignition module retaining screws. Reverse the process to install your new ignition module.
The 327 cubic inch Chevrolet's distributor had points and condenser and not an ignition module. If you have an ignition module then you have a HEI distributor that was changed out.
It is inside the distributor.