answersLogoWhite
Starters and Ignition Systems
Peugeot
Toyota Camry
Honda Civic EX

Where is the ignition relay on a 1990 Peugeot 205?

222324

Top Answer

User Avatar
Wiki User
2006-08-12 13:12:17
2006-08-12 13:12:17

in the fuse box under the bonnet

12

Related Questions

User Avatar

The Peugeot 205 is made by the French car manufacturer Peugeot. The Peugeot 205 was a small econoical car manufactured between 1983 and 1998.

User Avatar

A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.

User Avatar

peugeot 205 trio 1.1 has a bhp of 55 as standard

User Avatar

if its the same as a 1990 1.9 its on the rite hand side of the steering collum, remove two plastic bits of trim on the right hand side, , you should see the ecu with a relay bolted to the side , this will be your fuel pump relay, should have 7 wires going to it and one 10mm bolt holding it on :)

User Avatar

check your head light/dip relay located in the fuse tray in the glove box

User Avatar

From memory It's located very near the battery on on the bulkhead Mike 2

User Avatar

if its a 205 gti the door will go right on as 1993 & 1995 are both phaise 2 models if its a standared 205 not to sure.

User Avatar

all peugeot 205's have a fuel capacitie of 50 litres

User Avatar

Simple - NO IT IS HOT!

User Avatar

You should be able to but you will need new mounts and some links.

User Avatar

The single most effective location for a used Peugeot 205 vehicle to be listed would be in the classified ads section of the local and daily newspaper.

User Avatar

Yes, as long as your wheels are 4 stud. Some peugeot 106 models are 3 stud.

User Avatar

205/60R16 or 215/55R17

User Avatar

Not all 205's do. The cabriolet(CTI/CJ) has nowhere ideal to place them.

User Avatar

To find an electric schema for a Peugeot 205, a person can purchase an automotive repair manual from an automotive parts store. Chilton is the name of a manufacturer of a manual of this type.

User Avatar

If it's the same light as on my 205 TD, then I'm assuming you mean the coolant level indicator. There is a level sensor located at the bottom of the header tank. Top it up.

User Avatar

Green and red wire on lambdA sensor

User Avatar

Need more information. Too general a question.

User Avatar

Yes, and they will need to use the same wheel nuts as the 205 wheels.

User Avatar

you need to replace the stop solenoid on the top of the fuel pump if it is a lucas pump. I had the same problem, but they are are fantastic price, ie £72 plus vat from main dealer, so shop around or get one from a breakers. mine started without having to bleed the system, but you might have to. do it quick and it should be ok, be careful not to get the threads crossed it is fiddly. Keith 1990 205 grd

User Avatar

Change one at a time. Pull out the ignition lead and then get a 10mm spark plug socket. Unscrew and then screw in the plug fingertight. When its finger tight, tighten 1/2 a turn. Push the ignition lead back in and repeat on the rest of the plugs.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.