On the passenger side firewall, above the blower motor. There is a vacuum line attached to it that connects it to the top of the engine and an wires attached to it on the front.
The 1992 Ford F1 50 pickup truck 4.9 liter engine crankshaft sensor can be found on the back of the engine. You will to remove the rear engine cover in order to access the sensor.
The price is around $50 to $100 for the sensor and about 30-40 minuets to change when cool.
form_title= Ford F150 Brakes form_header= Drive safely with new brakes. When was the last time your brakes have been replaced?*= _ [50] Have you noticed any issues?*= () Yes () No Do you have to press hard on the brakes?*= () Yes () No
Left Hand. Size 50 Torx
The 2008 Ford F150 doesn't have a vent window. They do come with a Vent visor so that you can roll your window down a little bit without being in the elements, a replacement will cost you about $50.
The 1994 Ford F1 50 crankshaft sensor is located on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
A diagram of the Ford F1 50 front hubs can be obtained from most Ford dealerships. The front hub diagram can be found at most auto-parts stores.
I bought one off the internet for around $50, but found out it cost about $450 in labor to have it replaced.
The 1998 Ford F1 50 pickup truck ABS module is mounted to the firewall in the engine compartment. The module will be on the passenger side of the firewall.
The 1979 Ford F1 50 pickup truck transmission has a fluid capacity of 12 quarts. The manufacturer recommends that you never overfill the transmission.
The exhaust back pressure sensor on a 2006 6.0 diesel Ford F3 50 can be located near the exhaust manifold. The sensor is a probe that can be removed by loosening the nut.
The 1992 Ford F2 50 pickup truck 5.8 liter engine coolant temperature sensor can be found on the top of the engine. The coolant temperature sensor will be near the intake manifold.