The short shoe always goes to the front.
the answer is b, and the secondary shoe is longer harder and darker...
The drum and the brake shoes.
The integral brake is a parking brake that is on the inside of a disk brake system . This system use cables to engage the parking brake just the same a drum brake system.
The brake drum is the part which applies friction to the tire and allows your car to stop. It is a very important component of your braking system and should be maintained.
If it is a drum brake system, then you will have to remove the wheel ,drum, brake shoes, and hydraulic brake line , then remove and replace the cylinder with a new one re-assemble and bleed the hydraulic brake system
The wheel cylinder (used in drum brake applications) applies pressure delivered from the master cylinder via brake fluidto the brake shoes to pushagainst the brake drum to stop rotation.
Brake drums can be resurfaced by turning the brake drum in a brake drum lathe. When the brake drum has deep grooves in it, it cannot be repaired.
A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum. The term drum brake usually means a brake in which shoes press on the inner surface of the drum.
A drum brake is a brake that uses friction caused by a set of shoes or pads that press against a rotating drum-shaped part called a brake drum. The term drum brake usually means a brake in which shoes press on the inner surface of the drum.
Brake system usually has the following components: 1) brake pedal 2) brake fluid tank 3) brake system hoses 4) calipers 5) rotors 6) pads p.s. If it's a drum brake system - brake drums replace calipers and rotors.
A brake shoe is the part of a braking system which carries the brake lining in the drum brakes. It can be used in automobiles, bicycles, and other things.
You need the relevant operating system and a wheel that will take a disc rotor .