Under the dash slightly to the left of the steering column.
For the '94, it is an OBD-1 system. The connector is located on top of the transmission, under the air intake hose, on the right side of the engine. There are three connectors, the one closest to the firewall, with three wires, is the OBD connector.
1993 is OBD I and the connector is in the engine compartment above the transmission on the driver's side. I suggest using a code reader rather than trying to short wires.
The 1996 Mercury Sable the OBD 2 connector is under drivers dash next to kick panel
Unless you have the CP9190 model which includes several different hook-up cables, it can not be done. Pre-1996 vehicles are equipped with the OBD I system. The connector on the 1995 Villager is located on the transaxle near the starter.
most auto parts stores do it for free
The OBD connector is under the dash on the driver side.
To the right of the steering column under the dash.
Under the dash to the right of the steering column.
The OBD plug is a sixteen pin connector under the dash on the driver side.
Under the dash to the right of the steering column.
Under the dash to the right of the steering column.
directly below the steering wheel at the bottom of the dash