If you are wanting to change your oil and don't know how to get it out, you use an oil pan.
to get the oil out, go underneath your securely elevated car and look for a square box under there (metal in the components) it should be in the front, middleish, slightly behind your motor. To make sure it's the right box, look for a small screw on the back edge (this is for the 2004 Oldsmobile Alero) you'll need a wrench, but make sure to put your chest below the screw and your oil pan on top of your chest. or else you will get oil all over yourself. The oil filter is in the front side of the box.
btw my directions are as the car drives (forward is front)
The crank shaft position sensor is just above the oil filter at the tail end of the starter
if you mean the oil drain plug it is located in the middle of the oil pan usally a 15mm or a 14mm socket will remove it.
On the 3.4, directly above and to the right of the starter.
On a 2003 Oldsmobile Alero, the 4 cyl takes 5.0 quarts of oil. The V6 takes 4.5 quarts of oil.
how do you reset change the oil light in a 2004 alero?
no
how to removel oil pan for oidsmobile alero 99 and how many bolts have to remove
i have a 4cylndr 99 old alero gx and it requires 5w30
15 mm
4.5 quarts with new oil filter
how do you replace the oil pump
2.2l ecotec = 5 quarts 2.4l twin cam = 4 quarts 3.4l = 4.5 quarts 5w30